Composition: Rust-proof paint composed of chlorinated rubber, plasticizer, aluminum powder, etc..
Main characteristics: low permeability of water vapor and oxygen to paint film, excellent water resistance and good corrosion resistance; Dry is fast, several times faster than oil paint; It has excellent low-temperature construction performance and can be constructed at -20 °C ~ 50 °C. Paint film has good adhesion to steel; The coatings are mutually soluble and have excellent interlayer adhesion. It is not necessary to remove the strong old paint when repairing the coating on the old paint film of chlorinated rubber for easy maintenance; Paint film does not saponification, and cathodic protection has a good match; Good durability; Obtained the agriculture ministry fishing inspection type approval.
Application: It is suitable for corrosion prevention of rust paint, waterline, steel structure building and other steel structures.
Appearance: Silver White
Construction parameters: volume solid 37 ± 3 %(as determined by GB/T9272 eqv ISO 3233:1998); Dry film thickness: 40 μm; Wet film thickness: 108 μm; Theoretical dosage: 124 / M2; Flash point: 31 °C
Recommended coating number: 2-3, dry film thickness 80-120 μm.
Front end coating: 702 epoxy zinc workshop primer or 703 epoxy iron workshop primer, 704 inorganic zinc silicate workshop primer, or directly painted on steel surfaces that meet the requirements of rust removal quality.
Backway coating paint: 616 chloride rubber ferric red thick pulp anti-rust paint, or colored chlorinated rubber surface paint.
Surface treatment: Oxidized steel: sandblasting treatment to Sa 2.5; Non-oxidized leather steel: polished to St 3 with elastic grinding wheel, or sand-blasting to Sa 2.5; Steel coated with workshop primer: secondary rust removal at film damage and rust, grinding with elastic grinding wheel plate to St 3; Welding, flame cutting or pyrotechnical correction of burned parts: grinding with elastic grinding wheel to St 3;
Construction conditions: the substrate temperature must be higher than 3 °C above the dew point; Relative humidity not more than 85 %
Painting method: No gas spraying thinner: 101 diluent dilution: 0-5 %(by paint weight) nozzle diameter: 0.4-0 .5 mm ejection pressure: 15-20 Mpa(about 3-4 kg/cm2);
Air spraying: diluent: 101 diluent dilution: 0-10 %(by paint weight) nozzle diameter: 2.0-3 .0 mm ejection pressure: 0.3-0 .4 Mpa(approximately 3-4 kg/m2);
Roll/Brush: Paint with a film that does not reach the recommended dry film thickness thinner: 101 Diluent Diluent: 0-3 %(by paint weight)
Cleaning agent: 104 diluent
Safety measures: refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging: 22kg barrel
Life cycle: 12 months
Note: For the proper use of our products, please read the Guide to Use carefully in this manual.
Statement: The above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.