Composition: Rust-proof paint consisting of rust-resistant pigments, plasticizers, Auxiliaries and solvents, such as chlorinated rubber and iron.
Main characteristics: low permeability of water vapor and oxygen to paint film, excellent water resistance and good corrosion resistance; Dry is fast, several times faster than oil paint; It has excellent low-temperature construction performance and can be constructed at -20 °C ~ 50 °C. Paint film has good adhesion to steel; The coatings are mutually soluble and have excellent interlayer adhesion. It is not necessary to remove the solid old paint when repairing the coating on the old paint film of chlorinated rubber. Paint film in seawater is not saponification, and cathodic protection has a good match; Good durability; Recognized by the China Classification Society.
Application: It is suitable for corrosion prevention of the bottom of the ship, waterline of the ship, iron and steel structure building and other steel structures.
Appearance: Iron Red
Construction parameters: volume solid 42 ± 3 %(as determined by GB/T9272 eqv ISO 3233:1998); Dry film thickness: 75 μm; Wet film thickness: 179 μm; Theoretical dosage: 236 / M2; Flash point: 31 °C.
Recommended number of coats: 2, dry film thickness 150 μm. The total thickness of the paint film should not be less than 240 μm when using the anti-rust paint with 615-1 and 615-2 aluminum chlorinated rubber.
Front coat paint: 615-1, 616-2 aluminum powder chlorinated rubber anti-rust paint or 546 epoxy asphalt ultra-thick slurry anti-rust paint, 846 epoxy asphalt thick slurry anti-rust paint.
Backway applied paint: colored chlorinated rubber surface paint, 833 Wuxi self-polishing anti-fouling paint, 839 long-acting thick pulp anti-fouling paint.
Surface treatment: Front paint should be completely dry; Except for all the grease and debris on the paint film.
Construction conditions: the substrate temperature must be higher than 3 °C above the dew point; Relative humidity is not more than 85 %.
Painting method: No gas spraying: diluent: 101 diluent; Dilution: 0-5 %(in paint weight); Nozzle diameter: 0.4-0 .5 mm; Ejection pressure: 15-20 MPa(about 150-200 kg/c M2). Air spraying: diluent: 101 diluent dilution: 0-10 %(by paint weight) nozzle diameter: 2.0-3 .0 mm ejection pressure: 0.3-0 .4 Mpa(approximately 3-4 kg/m2);
Roll/Brush: Paint with a film that does not reach the recommended dry film thickness thinner: 101 Diluent Diluent: 0-3 %(by paint weight)
Cleaning agent: 101 diluent
Safety measures: refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging: 22kg barrel
Life cycle: 12 months
Remark: For the proper use of our products, please read the Guide to Use carefully in this manual.
Statement: The above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.